The tester intuitively reflects the combustion status of the boiler to guide operators to optimize the combustion.

• l Integrated sample and measure unit, sampling and measure is done inside the ash hopper
• Implemented unique frequency spectrum scanning technology. Analyzing carbon content of flying ash based on spectrum of unburned carbon

• Measuring range: (0.00~10.00)% (Expandable)
• Accuracy: (0.00~5.00)%, ±0.50% carbon content
• Output signal: 4~20mA
• Power supply: 220V
• Measuring time: 0.5~5min （Varies with different loads）
• Source gas pressure: 0.4~0.7MPa

• Coal type does not affect measurements
• Unique frequency spectrum scanning technologyeffectively overcome the influence to measurements caused by various coal types.
• Precisely controlled sampling amount and high accuracy
• Minimal maintenance required
• In-situ measurement; mechanical sampling avoids ash blocking the sampling tube
• Sampling is representative
• Sample within the ash hopper, samples are more representative than traditional sampling

• UCMS10 online fly ash carbon tester is composed of a measuring unit and a monitoring host. Measuring signals can be uploaded to DCS.
• The measuring unit is installed in the ash hopper of the electric field of the electrostatic precipitator to measure the carbon content of the fly ash in situ